Dosing Options

All Mespack machines are designed to incorporate a wide variety of different fillers for free and non-free flowing products, liquids of various viscosities, pieces and many others. Some machines can have a combination of up to 5 different types of filler for complex multi-component products.


This system is offered for conductive liquids and pasty products from 1 – 6 heads.

Options include:

  • Magnetic Inductive Flowmeter Bopp & Reuther
  • Mass Flowmeter Endress Hausser


This is a system used for free- flowing products and which can be filled by volume.

The system includes a stainless steel hopper which contains the products that flows by gravity into a rotary plate with built in cups. The cups are telescopic and allow a certain range of volume eg: 1 to 10cc, 20 to 40cc.

Different interchangeable sets of cups are available.

These are two systems available, the mechanically driven unit operated by a cam and the motorized clutch / brake unit.

These fillers can be either simplex or duplex.


This is a filling system for free and non-free flowing products as well as for dusty and volatile products.

There are two different versions of Auger Filler:

  • A/C Motor with clutch / brake system
  • D/C Servomotor

In both cases the fill dose is pre-set via the touch screen

When using a servo-motor, the accuracy and the stop position is always exact, (with no inertias). This system does not require any maintenance and allows adjustment of the speed and the acceleration / de-acceleration curves of the screw.

The link with the PLC is made through a port of communication RS 485.

Accuracy is around +/- 1 for most products. The auger fillers are available in simplex, duplex, triplex or quadruplex versions.


This type of filler is particularly recommended for viscous and pasty products.

The pump is composed of a 20 litre hopper made of stainless steel connected to an electrovalve which is synchronized with the filling machine via an electric signal.

There are several pump sizes to cover fill doses from 1 to 250 cc.

The nozzles are customized according to the product characteristics and can be supplied with suck back or blow off system.

This filling pumps have various optional accessories such as heated or pressurized hoppers for very thick products, hopper level detectors C.I.P. facilities etc.

Fill temperature up to 95º degrees centigrade.


This system is used for free flowing products which, due to their characteristics, cannot be dosed using a conventional system.

The vibratory filler is composed of stainless steel vibratory bowls which provide a continuous flow of product into the vibratory channels which are synchronized to the machine cycle.

Vibration intensity can be adjusted according to the characteristics of the product.


  • Multihead weighers
  • Counting machines
  • Linear weighers
  • Tablet feeders
  • mespack1
  • mespack2

Springvale Equipment Ltd.
37 High Street
GU34 1BD

+44 (0) 1420 542 505
+44 (0) 1420 549 527